|
Site.SideBar
|
- Lock your knife, edge down, into a padded vise. The padding doesn’t have to be anything elaborate. Two pieces of flat rubber or leather will keep the jaws from scratching the blade. You’ll need a sheet of fine (600 grit) wet/dry sandpaper available at any auto supply store or an abrasive cloth, sometimes called a crocus cloth. Using a gentle shoeshine motion, lightly round the edges of the spine. You don’t have to buff hard or remove a lot of metal. All you need to do is break the sharp edge at the base of the spine. How far you take it is up to you. This simple modification will make a world of difference in the comfort of your knives.
|
